Internal surfaces of a cold water storage tank prepared for WRAS approved coating
Tank Refurbishment

Water Tank Internal Coating
& WRAS Approved Relining

Relining a corroded or scaled tank with a WRAS approved potable-water coating — a fraction of the cost of replacement, and a durable surface that stays clean and keeps your water compliant.

What the service covers

Most older cold water storage tanks in Yorkshire buildings are galvanised steel, sectional or mild steel. Galvanising provides only limited protection: once the zinc layer is depleted the steel below corrodes, producing rust and scale that cloud the water, feed bacteria and, eventually, perforate the tank. A corroded tank also compromises the very thing sampling is meant to prove — a clean, controlled water system.

Applying an internal coating restores that barrier. We prepare the internal surfaces by cleaning back corrosion, scale and failed coatings, repair pits and seams where necessary, then apply a WRAS approved potable-water coating at the specified film thickness. Surface preparation is where the job succeeds or fails, so we work to a defined standard rather than painting over rust.

Where full internal coating is not warranted we will say so — sometimes a clean, localised repair and a lid and insulation upgrade is the honest recommendation. This page covers both internal coating and the narrower case of relining an existing tank; if the tank structure itself has failed, our tank refurbishment service and a replacement option may be more sensible.

Our process, step by step

01Tank survey and condition assessment with photographic record
02Isolation, drain-down and safe access arrangements
03Mechanical preparation with removal of loose coatings, corrosion and scale
04Structural repairs to pits, seams and tie bars where required
05Application of the WRAS approved potable-water coating at specified thickness
06Cure and inspection, with holiday testing of the finished surface
07Flush, disinfection to HSG274 Part 2 and post-work sampling
08Completion report, coating records and return-to-service certification

Frequently asked questions

What does "WRAS approved" actually mean for a tank coating?

WRAS approval — or regulation 31 approval for products used in England and Wales — means the coating has been tested and is accepted as suitable for contact with potable water, so it will not impart taste, odour or harmful substances into the supply. It is the minimum standard for any coating applied inside a cold water storage tank. Ask for the product name and its approval reference and check it is current for the application.

How long before the tank can go back into service?

It depends on the product and site conditions. Typical potable-water epoxy systems need the coated surface to cure and then be thoroughly flushed, disinfected and sampled before the tank returns to supply — often a few days of programmed downtime, which we plan with you before works start so that a temporary supply can be arranged if required.

Can coating be applied over a galvanised tank?

Often yes, provided the surface is prepared correctly and any corrosion is cut back and repaired first. Where galvanising is extensively degraded, or the tank structure is failing, relining may be uneconomic and replacement is the more sensible option. We will tell you which is which rather than coating a tank that will not last.

Is a coated tank easier to keep clean?

Considerably. A sound, smooth coating reduces the places where sediment and biofilm can settle, makes subsequent cleaning simpler and shortens disinfection contact requirements. It also removes the metallic corrosion products that feed bacterial growth in uncoated galvanised tanks.